IMPORTANT NOTICE: No dicamba herbicide has been approved for use in-crop with seed containing Roundup Ready® Xtend Technology for the 2025 spray season at this time.
No dicamba herbicide may be used in-crop with this seed unless and until such use is approved or specifically permitted. For current approval statuses for in-crop dicamba use with this seed, call 1-844-RRXTEND or 1-866-99-BAYER, or contact the U.S. EPA or your state pesticide regulatory agency. Plants that are not tolerant to dicamba may be damaged or killed if exposed to dicamba herbicides.
Weed Management Recommendations
Select your state and crop below to plan for superior weed control on even your toughest acres.
Select Your Crop
Plan for proven-performance weed control, even on your toughest acres.
Select Your State
Alabama Cotton Recommendation
Start Clean
Before planting
Consider using a cover crop as a beneficial tool for managing pigweed
Apply a Pre-Emergence Application
At planting (within 2 days of planting)
Apply two residuals at planting
(labeled pre-emergence herbicide)
Include paraquat if pigweed or other weeds have emerged
Apply a Post-Emergence Application
15-17 days after planting and less than 3-inch weeds
ORother labeled Group 15
ORother labeled Group 15
To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later
Apply a Second Post-Emergence Application (if needed on ≥ 20-inch rows)
15-17 days after POST 1 (before 9-leaf cotton) and less than 3-inch weeds
Lay-by Hooded Sprayer
POST directed
Herbicide
Herbicide
methanearsonate
(MSMA)
*Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later. Talk to your local Bayer representative for a local recommendation.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state.
Product rate recommendations are made on a per-acre basis, please follow all labeled restrictions.
Arizona Cotton Recommendation
Start Clean
Before planting
Apply a Pre-Plant Application
Apply a Pre-Emergence Application
At planting (within 5 days of planting)
Cotoran®
or Diuron®
Herbicide
(labeled pre-emergence
herbicide)
Apply a Post-Emergence Application
21 days after planting
OR5-metolachlor
OR5-metolachlor
Apply a Second Post-Emergence Application (if needed)
42 days after planting
Lay-by Hooded Sprayer
POST directed
Herbicide
*Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later. Talk to your local Bayer representative for a local recommendation.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state.
Arkansas Cotton Recommendation
Start Clean
Before planting
appropriate burndown herbicide at labeled rate or tillage
Apply a Pre-Emergence Application
At planting (within 5 days of planting)
Brake®
or Caparol®
(labeled rate for soil type)
(labeled rate)
Apply a Post-Emergence Application
1- to 2-leaf cotton and less than 3-inch weeds
Apply a Second Post-Emergence Application (if needed)
6- to 8-leaf cotton and less than 3-inch weeds
(labeled rate)
Do not exceed 3 lbs acetochlor (Warrant® Herbicide) per season per year
*Use labeled rate based on soil type.
1 Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later. Talk to your local Bayer representative for a local recommendation.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state. Product rate recommendations are made on a per-acre basis, please follow all labeled restrictions.
Florida Cotton Recommendation
Start Clean
Before planting
appropriate burndown herbicide at labeled rate or tillage
Apply a Pre-Emergence Application
At planting (within 2 days of planting)
15
ex. S-metolachlor
Diuron®
Herbicide or
Reflex®
(labeled pre-emergence
herbicide)
Include paraquat if pigweed or other weeds have emerged
Apply a Post-Emergence Application
Less than 4-inch weeds and between 20 and 30 days after pre-emergence application
15
ex. S-metolachlor
15
Apply a Second Post-Emergence Application
21-32 days after planting and less than 3-inch weeds
15
Lay-by Hooded Sprayer
POST directed
Herbicide
Herbicide
methanearsonate
(MSMA)
Herbicide
methanearsonate
(MSMA)
*Use labeled rate based on soil type.
1 Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later.
Talk to your local Bayer representative for a local recommendation.
Warrant (Group15) is not labeled in Florida.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state. Product rate recommendations are made on a per-acre basis, please follow all labeled restrictions.
Georgia Cotton Recommendation
Start Clean
Before planting
Consider using a cover crop as a beneficial tool for managing pigweed
Apply a Pre-Emergence Application
At planting (within 2 days of planting)
Apply two residuals at planting
(labeled pre-emergence herbicide)
Include paraquat if pigweed or other weeds have emerged
Apply a Post-Emergence Application
15-17 days after planting and less than 3-inch weeds
ORother labeled Group 15
ORother labeled Group 15
To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later
Apply a Second Post-Emergence Application (if needed on ≥ 20-inch rows)
15-17 days after POST 1 (before 9-leaf cotton) and less than 3-inch weeds
Lay-by Hooded Sprayer
POST directed
Herbicide
Herbicide
methanearsonate
(MSMA)
*Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later. Talk to your local Bayer representative for a local recommendation.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state.
Louisiana Cotton Recommendation
Start Clean
Before planting
appropriate burndown herbicide at labeled rate or tillage
Apply a Pre-Emergence Application
At planting (within 5 days of planting)
Brake®
or Caparol®
(labeled rate for soil type)
(labeled rate)
Apply a Post-Emergence Application
1- to 2-leaf cotton and less than 3-inch weeds
Apply a Second Post-Emergence Application (if needed)
6- to 8-leaf cotton and less than 3-inch weeds
(labeled rate)
Do not exceed 3 lbs acetochlor (Warrant® Herbicide) per season per year
*Use labeled rate based on soil type.
1 Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later. Talk to your local Bayer representative for a local recommendation.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state. Product rate recommendations are made on a per-acre basis, please follow all labeled restrictions.
Mississippi Cotton Recommendation
Start Clean
Before planting
appropriate burndown herbicide at labeled rate or tillage
Apply a Pre-Emergence Application
At planting (within 5 days of planting)
Brake®
or Caparol®
(labeled rate for soil type)
(labeled rate)
Apply a Post-Emergence Application
1- to 2-leaf cotton and less than 3-inch weeds
Apply a Second Post-Emergence Application (if needed)
6- to 8-leaf cotton and less than 3-inch weeds
(labeled rate)
Do not exceed 3 lbs acetochlor (Warrant® Herbicide) per season per year
*Use labeled rate based on soil type.
1 Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later. Talk to your local Bayer representative for a local recommendation.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state. Product rate recommendations are made on a per-acre basis, please follow all labeled restrictions.
Missouri (Bootheel) Cotton Recommendation
Start Clean
Before planting
appropriate burndown herbicide at labeled rate or tillage
Apply a Pre-Emergence Application
At planting (within 5 days of planting)
Brake®
or Caparol®
(labeled rate for soil type)
(labeled rate)
Apply a Post-Emergence Application
1- to 2-leaf cotton and less than 3-inch weeds
Apply a Second Post-Emergence Application (if needed)
6- to 8-leaf cotton and less than 3-inch weeds
(labeled rate)
Do not exceed 3 lbs acetochlor (Warrant® Herbicide) per season per year
*Use labeled rate based on soil type.
1 Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later. Talk to your local Bayer representative for a local recommendation.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state. Product rate recommendations are made on a per-acre basis, please follow all labeled restrictions.
National XtendFlex® Soybeans Recommendation
Start Clean
Use appropriate burndown herbicide at labeled rate or tillage
Pre/At Planting Application
Within five days of planting but prior to soybean emergence
Post-Emergence Application4
Within four weeks of planting and when weeds are less than 3-4 inches tall5 (recommended 20-30 days after planting)
AND/OR
*Addition of a glufosinate herbicide may antagonize the control of certain weed species by Roundup PowerMAX® Herbicide
1 Active ingredients include: Group 2 (Imazethapyr, chlorimuron-ethyl, cloransulam-methyl); Group 3 (pendimethalin); Group 5 (metribuzin); Group 14 (fomesafen, flumioxazin, sulfentrazone or saflufenacil); Group 15 (acetochlor, pyroxasulfone, s-metolachlor or dimethenamid-P).
2 Please refer to product labels for specific soil pH restrictions.
3 When considering Warrant® Ultra herbicide, substitute with Warrant® herbicide where Warrant® Ultra herbicide is not labeled or where carry-over is a concern. Refer to product label for special precautions on use rates by area and rotational restrictions and work with your local Bayer representative. When substituting Warrant Ultra herbicide with Warrant herbicide a labeled PPO-inhibiting herbicide may be added to the tank.
4 Wide row planted soybean may require another POST application.
5 Acres with glyphosate and PPO-resistant weeds, full labeled applications should be utilized and POST residual herbicide applications to be made before weed emergence.
New Mexico Cotton Recommendation
Start Clean
Before planting
Apply a Pre-Plant Application
Apply a Pre-Emergence Application
At planting (within 5 days of planting)
Cotoran®
or Diuron®
Herbicide
(labeled pre-emergence
herbicide)
Apply a Post-Emergence Application
21 days after planting
OR5-metolachlor
OR5-metolachlor
Apply a Second Post-Emergence Application (if needed)
42 days after planting
Lay-by Hooded Sprayer
POST directed
Herbicide
Herbicide
*Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later. Talk to your local Bayer representative for a local recommendation.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state.
North Carolina Cotton Recommendation
Start Clean
Before planting
Consider using a cover crop as a beneficial tool for managing pigweed
Apply a Pre-Emergence Application
At planting (within 2 days of planting)
Diuron®
Herbicide or
Reflex®
(labeled pre-emergence
herbicide)
(labeled rate)
Brake®
Herbicide
or Diuron®
Herbicide
(labeled pre-emergence
herbicide)
Apply a Post-Emergence Application
10-17 days after planting and less than 3-inch weeds
To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later
Apply a Second Post-Emergence Application
21-32 days after planting and less than 3-inch weeds
To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later
Do not exceed 3 lbs acetochlor (Warrant® Herbicide) per season per year
Lay-by Hooded Sprayer
POST directed
Herbicide
Herbicide
methanearsonate
(MSMA)
Herbicide
methanearsonate
(MSMA)
*Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later. Talk to your local Bayer representative for a local recommendation.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state.
Oklahoma Cotton Recommendation
Start Clean
Before planting
Apply a Pre-Plant Application
Apply a Pre-Emergence Application
At planting (within 5 days of planting)
Cotoran®
or Diuron®
Herbicide
(labeled pre-emergence
herbicide)
Apply a Post-Emergence Application
21 days after planting
OR5-metolachlor
OR5-metolachlor
Apply a Second Post-Emergence Application (if needed)
42 days after planting
Lay-by Hooded Sprayer
POST directed
Herbicide
Herbicide
*Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later. Talk to your local Bayer representative for a local recommendation.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state.
South Carolina Cotton Recommendation
Start Clean
Before planting
Consider using a cover crop as a beneficial tool for managing pigweed
Apply a Pre-Emergence Application
At planting (within 2 days of planting)
Diuron®
Herbicide or
Reflex®
(labeled pre-emergence
herbicide)
(labeled rate)
Brake®
Herbicide
or Diuron®
Herbicide
(labeled pre-emergence
herbicide)
Apply a Post-Emergence Application
10-17 days after planting and less than 3-inch weeds
To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later
Apply a Second Post-Emergence Application (if needed)
21-32 days after planting and less than 3-inch weeds
To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later
Do not exceed 3 lbs acetochlor (Warrant® Herbicide) per season per year
Lay-by Hooded Sprayer
POST directed
Herbicide
Herbicide
methanearsonate
(MSMA)
Herbicide
methanearsonate
(MSMA)
*Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later. Talk to your local Bayer representative for a local recommendation.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state.
Tennessee Cotton Recommendation
Start Clean
Before planting
appropriate burndown herbicide at labeled rate or tillage
Apply a Pre-Emergence Application
At planting (within 2 days of planting)
Brake®
or Caparol®
(labeled rate for soil type)
(labeled rate)
Apply a Post-Emergence Application
1- to 2-leaf cotton and less than 3-inch weeds
Apply a Second Post-Emergence Application (if needed)
21-32 days after planting 6- to 8-leaf cotton and less than 3-inch weeds
(labeled rate)
Do not exceed 3 lbs acetochlor (Warrant® Herbicide) per season per year
*Use labeled rate based on soil type.
1 Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later. Talk to your local Bayer representative for a local recommendation.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state. Product rate recommendations are made on a per-acre basis, please follow all labeled restrictions.
Texas Cotton Recommendation
Start Clean
Before planting
Apply a Pre-Plant Application
Apply a Pre-Emergence Application
At planting (within 5 days of planting)
Cotoran®
or Diuron®
Herbicide
(labeled pre-emergence
herbicide)
Apply a Post-Emergence Application
21 days after planting
OR5-metolachlor
OR5-metolachlor
Apply a Second Post-Emergence Application (if needed)
42 days after planting
Lay-by Hooded Sprayer
POST directed
Herbicide
Herbicide
*Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later. Talk to your local Bayer representative for a local recommendation.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state.
Virginia Cotton Recommendation
Start Clean
Before planting
Consider using a cover crop as a beneficial tool for managing pigweed
Apply a Pre-Emergence Application
At planting (within 2 days of planting)
Diuron®
Herbicide or
Reflex®
(labeled pre-emergence
herbicide)
(labeled rate)
Brake®
Herbicide
or Diuron®
Herbicide
(labeled pre-emergence
herbicide)
Apply a Post-Emergence Application
10-17 days after planting and less than 3-inch weeds
To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later
Apply a Second Post-Emergence Application
21-32 days after planting and less than 3-inch weeds
To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later
Do not exceed 3 lbs acetochlor (Warrant® Herbicide) per season per year
Lay-by Hooded Sprayer
POST directed
Herbicide
Herbicide
methanearsonate
(MSMA)
Herbicide
methanearsonate
(MSMA)
*Glufosinate tank-mixed with any Group 15 herbicides applied over the top of cotton with XtendFlex® Technology may cause injury in the form of necrotic spotting. Use of insecticides with these products can exacerbate injury under certain growing conditions. To reduce the likelihood of crop response, consider a sequential application of glufosinate (29-42 fl oz/A) followed by Warrant® Herbicide (3 pt) + Roundup PowerMAX® 3 Herbicide (30 fl oz) 5 days later. Talk to your local Bayer representative for a local recommendation.
Check with your local Bayer dealer or representative, U.S. EPA, and your state pesticide regulatory agency for the product registration status and additional restrictions in your state.
No dicamba may be used in-crop with seed with Roundup Ready® Xtend Technology, unless and until approved or specifically permitted, and no dicamba formulations are currently registered for such use in the 2024 season. Please follow www.roundupreadyxtend.com/xtendimax-updates for status updates.
Always read and follow pesticide label directions.
Performance may vary, from location to location and from year to year, as local growing, soil and environmental conditions may vary. Growers should evaluate data from multiple locations and years whenever possible and should consider the impacts of these conditions on their growing environment.
Not all products are registered for use in all states and may be subject to use restrictions. The distribution, sale, or use of an unregistered pesticide is a violation of federal and/or state law and is strictly prohibited. Check with your local dealer or representative for the product registration status in your state.
Tank mixtures: The applicable labeling for each product must be in the possession of the user at the time of application. Follow applicable use instructions, including application rates, precautions and restrictions of each product used in the tank mixture. Not all tank mix product formulations have been tested for compatibility or performance other than specifically listed by brand name. Always predetermine the compatibility of tank mixtures by mixing small proportional quantities in advance. Bayer, Bayer Cross, Roundup PowerMAX® and Warrant® are registered trademarks of Bayer Group. Fierce®, Mauler® and Valor® are registered trademarks of Valent U.S.A. Corporation. For additional product information call toll-free 1-866-99-BAYER (1-866-992-2937) or visit our website at www.CropScience.Bayer.us. Bayer CropScience LP, 800 North Lindbergh Boulevard, St. Louis, MO 63167. ©2024 Bayer Group. All rights reserved.
Bayer PLUS Rewards Calculator
Estimate your total rewards with the Bayer PLUS Rewards Incentive Calculator.
